3-way Switch to Single Pole 1

In the line (left) side outlet box, remove one of the traveler wires from the 3-way switch and install a wire connector on it to make it a spare. The other end of this wire will be capped in the load side box.

In the load side box, remove the switch. Attach a wire connector to cap off the other end of the spare traveler wire. Connect the 3-way switch common wire to the other traveler wire to supply switched line voltage to the light. Install a blank cover.

Single Pole Switch on Load Side

3-way Switch to Single Pole 2

In the line side box, remove the 3-way switch. Using a wire connector, connect the line wire to one of the traveler wires to supply line voltage to the load side box. Install a wire connector on each end of the other traveler to make it a spare. Install a blank cover on the box.

In the load side box, remove the traveler spare wire from the switch and attach a wire connector to it.

See page 2 for wiring options 2 and 3

Single Pole Switch on Line Side

Convert 3-Way Switch to Single Pole

How to Convert 3-Way Switches to Single Pole

To convert a 3-way switch to a single pole, one of the traveler wires is removed from the switch. In order for a 3-way switch to function as a single pole, the wires need to be connected to the common and one of the traveler terminals. It will not work if the wires are connected to the two traveler terminals. The other traveler terminal is left unconnected. Find Light Switches Find 3-Way Switches

3-way switches can be converted to single pole in several configurations.

1. Single pole switch on line side (left side of diagram), blank cover on load side (to light).

2. Blank cover on line side, single pole switch on load side

3. Single pole switch on line side, outlet on load side.

4. Outlet on line side, single pole switch on load side.

The following diagrams show each wiring configuration. Do not trim wires shorter than six inches.

Ground connection diagram is shown separately.